Mustek PP3000 Manual do Utilizador descarregar pdf (Página 39)

3 - 19

PST-7000 series user’s manual – INSTALLATION GUIDES

CASH DRAWER

The PST7000 is able to control most of the common cash drawers available on

the market. However, it is recommended that the Posiflex CR-3100 or CR-3200 or

CR-4000 or CR-4100 be used since the terminal has been designed to compliment this

cash drawer both mechanically and electrically.

The PST7000 will directly control the cash drawer using the cash drawer port

(CR) both to operate the opening mechanism and to monitor the drawer open status.

Both functions may be accomplished under software control of the COM1 serial port.

The PST terminal must be connected to the CR-3X00/4X00 cash drawer using

the cable supplied with the terminal (Part No. CCBLA-180) in the accessory box.

The cable assembly has a 6 pole plug at one end and a 8 pole plug at the other.

The 8 pole plug should be inserted into the connector marked: “signal cable

from POS Printer” at the rear of the cash drawer.

The 6 pole plug should be inserted in the connector marked “CR” found in the

rear compartment of the terminal.

The cash drawer may be mounted beneath a sales-counter using an optional

mounting bracket or the terminal may be placed directly onto the cash drawer.

The PST7000 series offers another advanced feature in the cash drawer control

by using the optional split cash drawer control cable CCBLA-238 which has a 6 pole

plug at one end and two 8 pole plugs at the other. The 6 pole plug should be inserted

in the connector marked “CR” found in the rear compartment of the terminal. Each 8

pole plug should be inserted into the connector marked “signal cable from POS

Printer” at the rear of one of the cash drawer. The cable lengths for the two 8 pole

plugs are different. Use the shorter one for the original cash drawer “CR1” and use the

longer one for the extended cash drawer “CR2” that will be distinguished by the

software command. In this way, the PST7000 is capable of controlling two cash

drawers independently through software command.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 66 67

Sem comentários

Mustek PP3000 Manual do Utilizador Página 39