Mustek PP3000 Especificações descarregar pdf (Página 45)

PST-1000 series Technical Manual 5 - 17

NORITAKE MODE -- 2 LINES X 20 CHARACTERS

(CONTINUED 2)

COMMAND DESCRIPTION (limitations)

<1E><P>

Change font page

+ P = 0: page 0 selected

P = 1: page 1 selected

<01>

Set Pass-through Flag

Serial Pass-through and Parallel Pass-through pole displays

only. Enables the pass- function. All data following the

setting of this flag will pass-through the pole display and go

to another peripheral device.

<21> <23> <02>

Clear Pass-through flag

Serial Pass-through and Parallel Pass-through pole displays

only. Disables or clears the pass-through function. (Two

leading codes are programmable)

<06>

Change leading code

The two leading code followed the command will replace the

default leading code <21> and <23>.

<1B> <43>

User Defined Graphics/Fonts:

<Addr> specifies the address where the user defined

graphics/font to be stored. <x1>......<x16> are the 16 bytes

defining the dots of the 8 x 16 matrix to be turned on in the

user defined character (ref. 4.4). Recommended <Addr>= A0

through FF, and no more than 3 user defined graphics/fonts.

<1B> <3D> <n>

Reset display mode

n = 10-> Epson 2 x 20 mode

n = 20-> Noritake 2 x 20 mode

n = 40-> Epson 4 x 26 mode

n = 80-> (must not be used)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 78 79

Sem comentários

Mustek PP3000 Especificações Página 45