Mustek PP3000 Especificações descarregar pdf (Página 33)

PST-6000 series Technical Manual 5 - 3

CUSTOMER DISPLAY

In the following sections, it is assumed that before any command / data given

to the customer display, the PST system should have been previously prepared for

issuing command to the customer display unit through the following command given

under DOS environment:

C:\> mode com1 96,n,8,1 (enter)

In other words, the protocols in RS-232C communication are listed below:

Serial Port Used COM 1

Baud Rate 9600 bps

Parity Check none

Date Bits 8

Stop Bits

As for the data displayed, please refer to the appendix of this manual. The 5 x

7 fonts used in PD-2101 page 0, PD-2101 page 1, PD-2101 EPSON emulation page 0

and PD-2101 EPSON emulation page 1 describe PD2101. The 8 x 16 fonts used in

PD-7001 page 0, PD-7001 page 1 and international character sets describe PD7001.

However, the simplified Chinese characters in PD7011 and the traditional Chinese

characters in PD7021 are not listed.

The hardware handshaking signal of the customer display is defaulted to use

CTS signal. For PST6000 series of system version C introduced in 2

quarter of 1998

onward, this handshaking signal is selectable between CTS and DSR through change

of jumper setting according to the description in hardware details.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 81 82

Sem comentários

Mustek PP3000 Especificações Página 33